308 features ?ultra-compact 1.0mm (.039") pitch and only 2.0mm (.079") high and 4.5mm (.177") thick. ?twin u-slot insulation displacement section the insulation displacement section connected to each wire consists of two tin-plated slots (twin u-slots), which ensures reliable connection. ?3-point grip construction the 3-point insulation grip feature and the strain relief ensure a firm grip on terminated wires and protection of the insulation displacement connection from possible damage. ?header designed for vacuum pick and place robotics although this shrouded header has locking features for its mating receptacle, there are no holes in the header shroud that would adversely effect vacuum gripping equipment. since there is enough flat surface for secure vacuum gripping, this miniature surface mount connector is versatile for designers and economic for manufacturing. specifications ?current rating: 0.5a ac, dc ?voltage rating: 50v ac, dc ?temperature range: -25?c to +85?c (including temperature rise in applying electrical current) ?contact resistance: initial value/20m ? max. after environmental testing/40m ? max. ?insulation resistance: 100m ? min. ?withstanding voltage: 500v ac/minute ?applicable wire: awg #32 conductor/7 stands, tin-coated annealed copper insulation o.d./0.52 to 0.56mm (.020" to .022") * contact jst if lead-free product is required. * refer to "general instruction and notice when using terminals and connectors" at the end of this catalog. * contact jst for details. standards 0 recognized e60389 1 certified lr20812 ssr connector disconnectable insulation displacement connectors 1.0mm (.039") pitch idc emboss tape www..net
309 3.5(.138) 2.2(.087) 1.0(.039) 1.0(.039) 1.85(.073) 1.55 (.061) a b circuit no.1 b 2 3 4 5 6 8 9 10 11 12 13 14 02ssr-32h 03ssr-32h 04ssr-32h 05ssr-32h 06ssr-32h 08ssr-32h 09ssr-32h 10SSR-32H 11ssr-32h 12ssr-32h 13ssr-32h 14ssr-32h 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 a 1.0(.039) 2.0(.079) 3.0(.118) 4.0(.157) 5.0(.197) 7.0(.276) 8.0(.315) 9.0(.354) 10.0(.394) 11.0(.433) 12.0(.472) 13.0(.512) 3.0(.118) 4.0(.157) 5.0(.197) 6.0(.236) 7.0(.276) 9.0(.354) 10.0(.394) 11.0(.433) 12.0(.472) 13.0(.512) 14.0(.551) 15.0(.591) circuits model no. material and finish contact: phosphor bronze, tin-plated housing: nylon 46, ul94v-0, gray q'ty / box dimensions mm(in.) header outline 0.6 0.05 (.024 .002) 1.0 0.05 (.039 .002) 4.5 0.1 (.177 .004) 4.5(.177) 2.0(.079) 1.0 0.1(.039 .004) 0.2 0.1 (.008 .004) 2.95 0.1 (.116 .004) 1.8 0.1 (.071 .004) 1.2 0.1 (.047 .004) receptacle pc board layout (viewed from component side) and assembly layout 3.2(.126) 0.7(.028) 0.2(.008) 1.5 (.059) 1.3 (.051) 1.0(.039) 1.95 (.077) a b circuit no.1 b 2 3 4 5 6 8 9 10 11 12 13 14 1.0(.039) 2.0(.079) 3.0(.118) 4.0(.157) 5.0(.197) 7.0(.276) 8.0(.315) 9.0(.354) 10.0(.394) 11.0(.433) 12.0(.472) 13.0(.512) 4,500 4,500 4,500 4,500 4,500 4,500 4,500 4,500 4,500 4,500 4,500 4,500 4.6(.181) 5.6(.220) 6.6(.260) 7.6(.299) 8.6(.339) 10.6(.417) 11.6(.457) 12.6(.496) 13.6(.535) 14.6(.575) 15.6(.614) 16.6(.654) a sm02b-ssr-h-tb sm03b-ssr-h-tb sm04b-ssr-h-tb sm05b-ssr-h-tb sm06b-ssr-h-tb sm08b-ssr-h-tb sm09b-ssr-h-tb sm10b-ssr-h-tb sm11b-ssr-h-tb sm12b-ssr-h-tb sm13b-ssr-h-tb sm14b-ssr-h-tb circuits q'ty / reel dimensions mm(in.) model no. material and finish contact: copper-alloy, copper-undercoated, tin/lead-plated wafer: polyamide, ul-94v-0, gray solder tab: brass, copper-undercoated, tin/lead-plated shrouded header note : 1.tolerances are non-cumulative: 0.05mm ( .002") for all centers. 2.the dimensions above should serve as a guideline. contact jst for details. note : the products listed above are supplied on embossed-tape. ssr connector www..net
310 feeding direction feeding direction feeding direction 2.0 0.5(.079 .020) 380 2.0(14.961 .079)dia. [13(.512)dia.] cover tape leader carrier tape the end part 160(6.299)min. leader part 100(3.937)min. connector mounting part 400(15.748)min. 8.0 0.1 (.315 .004) carrier tape cover tape w1 +2.5 -1.0 +.098 -.039 ( ) 1.55 0.05 (.061 .002)dia. 4.0 0.1 (.157 .004) 2.0 0.1 (.079 .004) f 0.1(.004) 1.75 0.1(.069 .004) w 0.3(.012) 2 3 to 6 8 to 14 fw w1 5.5(.217) 7.5(.295) 11.5(.453) 12.0(.472) 16.0(.630) 24.0(.945) 13.5( .531) 17.5( .689) 25.5(1.004) 4,500 4,500 4,500 circuits dimensions mm(in.) reel dimensions mm(in.) q'ty / reel taping specifications note: 1. specifications conform to jis c 0806. the tape width, connector recess hole dimensions, etc.are determined by the number of circuits and external shape of the connector to be loaded. 2. specifications are subject to change without prior notice. ssr connector www..net
|
